Motion LEDs
The motion LED light on the Alert Camera is located under the lens and Logitech logo. You will know the camera is recording when the LED is red and blinking. If the LED is solid red, then the camera is ready to record.
|
LED |
Description |
|
|
Camera is ready to record (Red) |
|
|
Camera is recording (Red, blinking) |
Diagnostic LEDs
The diagnostic LEDs are located on the back side of the Alert camera, under the connector cable that is plugged into the camera. Diagnostic LEDs help you understand the working status of the camera at any given time.
These colors indicate the camera is working:
|
LED |
Description |
|
|
Connected to online (Green) |
|
|
Connected to Alert Commander (Purple) |
|
|
Connected to Alert Commander & Internet (Dark Blue) |
|
|
Upgrading firmware (White) |
|
|
Camera in standalone mode (Yellow) |
|
|
Not connected to Alert Commander or online (Light Blue) |
These diagnostic LEDs indicate the camera is NOT working:
|
LED |
Description |
|
|
Camera boot-up failed * (Red blinking) |
|
|
microSD card read/write failure – No microSD card * (Alternating Red / Yellow, blinking) |
* See Camera Reset Instructions for assistance.
Related Topics